Ozcan Northern - SpeedStar SS-50K

By: Ozcan Northern  09-12-2011
Keywords: pump, Hydraulics, air compressor

The 50K has all of the benefits of the 30K with more capacity. With 50,000 lbs. of top head hoist, a wider mast and table this drill can handle large casing loads associated with shallow municipal water wells and deep residential water wells with ease.

The 50K has the same features that have made the 30K a leader including:

• Single rod loader for quick and safe connections.

• Air operated compressor clutch for fuel savings and noise reduction during times when air is not needed.

• Field proven PTO design reducing maintenance costs and noise.

• Superior closed loop hydraulic system.

With the Speedstar trademark for user-friendly controls, superior hydraulics, and mud and air options, this is one of the most versatile mid-range drills on the market today.

SPECIFICATIONS

MOUNTING 6 x 4 truck, 550 H P (41 0 kw) diesel. 68,000 lbs. (30,845 kg) GVWR.
MAST 35ft. (10.7 m) height above breakout table.
TOPHEAD 5,833 ft-lbs. (7,909 Nm) of torque. 0-120 RPM. 2-1/2 in. (63.6 mm) diameter opening
through quill. 29ft. (8.8 m) of travel.
PULLDOWN/HOLDBACK Pulldown capacity up to 25,000 lbs. (11,340 kg). Holdback capacity up to
50,000 lbs. (22,680 kg).
HYDRAULIC HOISTING DRUM Standard 25,000 lbs. winch over jib boom. Optional 2 part winch through crown block
2 Options rated for 50,000 lbs.
HYDRAULIC LEVELING JACKS Two 48 in. stroke (1,219 mm) front jacks located behind truck cab.
Two 36 in. stroke (914 mm) rear jacks.
AIR COMPRESSOR Two-stage twin-screw 1,000 CFM (25.5 m3min) up to 350 PSI (24.1 bar).
Equipped with clutch.
BREAKOUT TABLE Retracts hydraulically to provide 18 in. (457 mm) opening in frame. Sliding holding
wrench to hold pipe.
WATER INJECTION 18 GPM (68.1 LJm) pump standard. 25 GPM (96.6l/m) pump optional.
LUBRICATOR 7 gallon (26.5 l) capacity, electrically controlled. Maximum displacement 3 qts/hr. (2.8
l/hr).
CAROUSEL 6-pod carousel for 4-1/2 in. x 20ft. (114 mm x 6.1 m) or 3-1/2 in. x 20ft.
(88.9 mm x 6.1 m) drill pipe (pipe included).
PIPE LOADER Single pipe loader for 4-1/2 in. x 20ft. (114 mm x 6.1 m) or 3-1/2 in. x 20ft.
(88.9 mm x 6.1 m) drill pipe.
PIPE SPINNER Hydraulically-powered spinner for spinning pipe in or out.
BREAKOUT WRENCH Modified 60 in. (1.5 m) pipe wrench hydraulically controlled.
PIPE CARRYING RACK Mounted on the right side of the frame. Maximum capacity of 15 pieces of
4-1/2 in. x 20ft. (114 mm x 6.1 m) drill pipe or 15 pieces of 3-1/2 in. x 20ft.
(88.9 mm x 6.1 m) drill pipe.
REMOTE JIB CONTROLS Independent controls located opposite driller's side for jib and winch functions.

POPULAR OPTIONS

MUD PUMPS 5 x 6 piston pump, 4 x 3 centrifugal pump or diaphragm pump.
AUXILIARY WINCHES Tool-handling winches available.
WELDER Hydraulically-driven welder with accessory power and weatherproof cover (Diesel Option).
ENGINE HEATER 40,000 btu engine heater.
CASING HAMMER Hydraulic or air-operated casing hammer package.

WEIGHTS AND DIMENSIONS

Length: 35ft. 6 in. (10.8 m); Width: 8ft. 6 in. (2.6 m); Height 13ft. 3 in. (3.8 m);
Approximate weight: 56,000 lbs. (25,401 kg).


Keywords: air compressor, Drill Pipe, Hydraulics, Leveling Jacks, Maintenance Costs, Municipal Water Wells, noise reduction, pump, Water Injection, Water Wells,

Contact Ozcan Northern

Email - none provided

Print this page

Other products and services from Ozcan Northern

09-12-2011

Ozcan Northern - Products

With 50,000 lbs. of top head hoist, a wider mast and table this drill can handle large casing loads associated with shallow municipal water wells and deep residential water wells with ease. With the Speedstar trademark for user-friendly controls, superior hydraulics, and mud and air options, this is one of the most versatile mid-range drills on the market today. The 50K has all of the benefits of the 30K with more capacity.


09-12-2011

Ozcan Northern - StarDrill SD-300

Mud Pump Choose from 5 x 6 piston pump, centerline mono pump, centerline duplex pump, 4 x 3 centrifugal pump, diaphragm pump, or Moyno pump. Line runs over jib boom for positioning drillpipe over the centerline of the bore hole or pipe rack. Remote Jib Controls Independent controls on helper’s side for jib and winch functions. Pulldown/Holdback Pulldown capacity up to 15,000 lbs..


09-12-2011

Ozcan Northern - SpeedStar SS-30K

This drill is known world wide in the water well industry for its reliability, durability and ease of operation making the 30K the leader in its class. 25,000 lbs. single line winch over the jib combined with the hydraulic rod spinner makes tool handling and tripping the hole fast and easy. Independent controls located opposite driller's side for jib and winch functions. Pulldown capacity up to 25,000 lbs..


09-12-2011

Ozcan Northern - SpeedStar SS-185K

The workhorse of the GEFCO top head product line is the 185K, which is a relatively new style drill to our line up. With 51 ft. of working space above the table and 185,000 lbs. of top head hoist with speeds around 140 f.p.m. The only rig in its class with the ease and efficiency of racking pipe. Cylinder cable feed rate of 0 - 209 FPM (84 mpm). Maximum pulldown capacity of 30,000 lbs..


09-12-2011

Ozcan Northern - SpeedStar SS-22RT

Order yours with an 18” retractable table with one of the many mud pump options and you can tackle just about any job. With a maximum hook load of 66,250 lbs. and single line pull of 18,000 lbs., this drill is not short on power. X 6 piston pump; 5-1/2 x 8 piston pump; 7-1/2 x 8 piston pump, 4 x 3 centrifugal pump. Full torque gear type with helical gear, positive lubrication. Structural steel frame complete with mast hinge posts.


09-12-2011

Ozcan Northern - SpeedStar SS-135

With 10,900 lbs. single line pull and maximum hook load just over 30,000 lbs., it’s the perfect drill for the residential water well and geo thermal contractor. Rotary table drill has several mud pump and compressor options to meet the needs of any driller. Double drum drawworks with air clutches standard.