Drilling Equipment | NEWTECH NDT Inspection Services

By: Newtech Ndt Inspection Services  09-12-2011
Keywords: Liquid Penetrant, Magnetic Particle Inspection, Particle Inspection

Thread / Seal Coating

A rust preventive thread coating is applied to maintain the integrity of the tubular threads and seals, either API-approved or customer specified, to protect the threads and seals in storage and transit. Thread coating is applied to ALL pin and box threads, seals and pin ID’s.

API Thread Gauging and Inspection

A hardened and precision ground profile gauge is mated to all threads at a minimum of four locations around the circumference of the threads to confirm the proper thread form.

Mill Slotting and Serialization

When requested we will cut a round or elongated slot into the body or tool joints of drill stem components before stamping an assigned serial number into the slot with a 3/8" steel die stamp. A slotted drill specifically designed for this use is employed and allows our operators to go on-site and perform the job at the clients location. Client specifications are followed.

Machine Shop

We can provide a variety of machine shop services through an affiliate company offering:

  • Precision Oilfield Grinding
  • Machining
  • Rethreading
  • Other Specialty Grinding Services as Requested.

Bottom Hole Assembly Inspection

On site visual, dimensional, and magnetic particle or liquid penetrant inspection of all components in the bottom hole assembly; to include all subs, magnetic and non-mag drill collars, hevi wate drill pipe, jars, stabilizers, shock tools, directional tools, specialty tools, etc.

Overhead Assembly Inspection

On site visual, dimensional, and magnetic particle or liquid penetrant inspection of all components in the overhead assembly; to include the swivel or top drive, upper kelly cock, double pin cross over, kelly bar, saver sub, pick up subs, nubbins, etc.

Rig Equipment Inspection

On site visual, dimensional, and magnetic particle inspection (Yoke Magnetization Technique) of drilling rig equipment including inspection and certification of: tongs, pipe arms, picker arms, hooks, blocks, brake bands, elevators, slips, bails, sheaves, welded areas of high pressure lines and various other hoisting and drilling equipment.

Used Tubular Inspection

On site visual, dimensional, and magnetic particle inspection of used drilling tubulars; to include all drill collars, hevi wate drill pipe, and drill pipe. Includes inspection of tube body, pin and box threads, pin and box seals, pin ID's, upset areas, elevator areas, and slip areas.

Portable Refacing Unit

All of our mobile units are outfitted with seal refacing equipment. We perform seal refacing to ALL of the tubulars that we inspect. Many inspection companies reface only the severely damaged seals, we leave all of your seals looking brand new with a machine finish. This process removes imperfections and washes on the seals and increases the life span of tool joints.

Keywords: High Pressure Lines, Liquid Penetrant, Magnetic Particle Inspection, Particle Inspection, Thread Gauging,

Contact Newtech Ndt Inspection Services

Email

Print this page

Other products and services from Newtech Ndt Inspection Services

09-12-2011

Rig Inspection / Certification | NEWTECH NDT Inspection Services

In association with our partner engineering companies we are able to handle your entire inspection and certification process, whether it be for a service rig, drilling rig, or flushby unit, we are able to handle the process accurately and efficiently in accordance with the recommended practices. A thorough visual inspection of all load bearing members, welds and pickup points must be conducted to determine the condition of the mast.


09-12-2011

Structural Weld Inspections | NEWTECH NDT Inspection Services

Liquid Penetrant weld inspection This type of inspection is used for all non magnetic materials like aluminum, magnesium, titanium, copper etc. and is most apt to detect the finest cracks. The surface is then scanned visually with the aid of an ultraviolet light by the inspector to find small surface and sub surface cracks, laps, seams, pits, and voids.


09-12-2011

Service Equipment | NEWTECH NDT Inspection Services

Newtech NDT provides a casing and tubing inspection and survey service that focuses on inspecting tubulars for transportation and handling damage when the products are in transit or arrive at their final destination. Special clearance drift mandrels, furnished by the customer, are passed through the full length of each tube to determine special clearances on the internal diameter.