Integra Engineering Ltd. - Process Engineering

By: Integra Engineering  09-12-2011

  • Refrigeration/choke plants
  • Acid gain removal packages
  • Gas dehydration packages
  • Two and three-phase separators
  • Pumping/compressor systems
  • Power plants


CHEMCAD Modules
:

Heat Exchanger Design of Rating Module
The heat exchanger modeling covers shell of tube, plate of frame, air cooled, and double pipe exchangers.  Rigorous designs/evaluations are based on CHEMCAD’s foundation of physical property and phase equilibrium data.

Piping of Safety Relief Network Simulation Module
Allows rigorous analysis of any piping network.  It combines the least in two-phase relief device calculation, rigorous pressure drop calculation, rigorous physical property calculation and rigorous phase equilibrium calculation to give you fast, accurate answers.

These software packages assist our process engineering staff in the design of complex compressible and incompressible piping systems, to conduct thermal analysis for piping heat transfer and heat exchanger modeling, and simulate various fluid mixture properties.


Contact Integra Engineering

Email

Print this page

Other products and services from Integra Engineering

09-12-2011

Integra Engineering Ltd. - Electrical Engineering

Although in the Western Canadian Oilfield most power systems are generally 480 Volt 60 Hz, Integra has successfully completed electrical power systems designs for supplies of 380 Volt 50 Hz, 600 Volt 60 Hz and 4160 Volt 60 Hz. Our experienced electrical design team strives to put together well thought out, safe, reliable and economical power and control systems, and does it in a timely manner.


09-12-2011

Integra Engineering Ltd. - Heavy Oil Engineering - heavyoil

Conventional Atmospheric Treating Facility – offer a more cost effective solution for lower design rates if higher temperatures are not required. Modular design and accurate drawings allow for a quick turnaround, which minimizes the time to bring new production online. Integra has completed numerous heavy oil pad tie-ins ranging from four to twelve well pads with above ground piping.


09-12-2011

Integra Engineering Ltd. - Heavy Oil Engineering - water

With bulk water separation/injection facilities either in the field or at the plant gate, more fluid can be processed, ensuring a longer operating life. As fields age, generally the water cut increases to the point where existing facilities do not function, forcing the producer to shut-in production.


09-12-2011

Integra Engineering Ltd. - Natural Gas Facilities

With a growing concern for the environment and exploding natural gas prices, gas flaring and venting has come to the forefront for producers. Solution Gas Capture and Compression.


09-12-2011

Integra Engineering Ltd. - Pushwater Pipeline Systems

An example of a multi-phase emulsion gathering system project which entailed a 6.5 km dual pipeline system consisting of 6” and 8” internally lines flowlines, the lines were designed to run in parallel or in series with pushwater. Integra has been involved in innovative systems involving the use of pushwater to assist the flow of heavy oil up to distances of 6 to 12 kilometers.