Integra Engineering Ltd. - Natural Gas Facilities

By: Integra Engineering  09-12-2011

With a growing concern for the environment and exploding natural gas prices, gas flaring and venting has come to the forefront for producers. In the past 10 years, Integra has been involved in the design and installation of:

  • Casing Gas Compressor Systems
  • Solution Gas Capture and Compression
  • Gas Well Booster Compressors
  • Conventional Natural Gas Processing Facilities

Contact Integra Engineering


Print this page

Other products and services from Integra Engineering


Integra Engineering Ltd. - Electrical Engineering

Although in the Western Canadian Oilfield most power systems are generally 480 Volt 60 Hz, Integra has successfully completed electrical power systems designs for supplies of 380 Volt 50 Hz, 600 Volt 60 Hz and 4160 Volt 60 Hz. Our experienced electrical design team strives to put together well thought out, safe, reliable and economical power and control systems, and does it in a timely manner.


Integra Engineering Ltd. - Heavy Oil Engineering - heavyoil

Conventional Atmospheric Treating Facility – offer a more cost effective solution for lower design rates if higher temperatures are not required. Modular design and accurate drawings allow for a quick turnaround, which minimizes the time to bring new production online. Integra has completed numerous heavy oil pad tie-ins ranging from four to twelve well pads with above ground piping.


Integra Engineering Ltd. - Heavy Oil Engineering - water

With bulk water separation/injection facilities either in the field or at the plant gate, more fluid can be processed, ensuring a longer operating life. As fields age, generally the water cut increases to the point where existing facilities do not function, forcing the producer to shut-in production.


Integra Engineering Ltd. - Process Engineering

These software packages assist our process engineering staff in the design of complex compressible and incompressible piping systems, to conduct thermal analysis for piping heat transfer and heat exchanger modeling, and simulate various fluid mixture properties.


Integra Engineering Ltd. - Pushwater Pipeline Systems

An example of a multi-phase emulsion gathering system project which entailed a 6.5 km dual pipeline system consisting of 6” and 8” internally lines flowlines, the lines were designed to run in parallel or in series with pushwater. Integra has been involved in innovative systems involving the use of pushwater to assist the flow of heavy oil up to distances of 6 to 12 kilometers.