Thermo-Tech Mechanical - SRP

By: Thermo-Tech Mechanical Services  09-12-2011

SERIES UA and UX INFRARED HEATERS

40,000 to 220,000 btu/h

Natural Gas and LPG

Configurations of "U" and "L", horizontal or 45�

Separated Controls compartment

Electronics out of air stream

Burner can run during servicing

Self diagnostic ignition module

Parabolic Aluminum reflectors

(Most efficient in industry)

Direct Spark Ignition

Vented or unvented

Jet Stream burner

Improved heat distribution

Better combustion

Heavy Duty Couplings

No leaks

Cannot be over tightened

Operating Status Light

Low Voltage Controls

Three year warranty on all components

Five year warranty on hot rolled heat exchanger

Seven year warranty on aluminized heat exchanger with post purge feature

10 year warranty on optional aluminized heat exchanger with post purge feature


MODEL UX

Features of the UA and more

Rates 40,000 to 220,000 btu/h

Fully enclosed construction

Operating status lights

Post purge function

10 year heat exchanger warranty option

MODEL UA

A heavy duty industrial/commercial heater with the widest rate range and most efficient reflector in the industry.

-Rates 40 000 to 220 000 btu/h

-Hinged service cover

-3 try spark ignition

-100% reflector efficiency

MODEL RE

High efficiency residential heater in two rates

-30 000 and 45 00 btu/h

-Balanced flue construction

-85% thermal efficiency

-fully assembled for easy installation

Model MA/MX

Standard design with Hi-Lo Capability

Model LA/LX

Provides unequalled even Heat Distribution

-End to end radiant output variance less than 15%

-Ideal for animal confinement applications low ceilings, hallways


Couplings

-Heavy duty design

-No leaks

Vacuum Pumps

-Sized for your system capacity

-Cast aluminum housing for corrosion housing resistance & ductility with less weight

Model Premier VS

A vacuum series system that outperforms all others.

-Vacuum operated system

-Burner rates 60 000 to 250,000 but/h

-System output up to 1,000,000 btu/h



Contact Thermo-Tech Mechanical Services

Email - none provided

Print this page

Other products and services from Thermo-Tech Mechanical Services

09-12-2011

Thermo-Tech Mechanical - OsKar

The use of self supporting joints, flexible hoses and smooth bore tubing allow for easy placement of the arm?s hood near the source of the problem. Oskar self supporting fume arms provide the economical and effective methods for the capture of fumes. Chemical applications such as laboratories. Grinding dusts and most airborne dusts.


09-12-2011

Thermo-Tech Mechanical - GeneralAire

Thumb screws allow access to distribution through, drain pan and evaporator pad for easy cleaning and service. This rugged commercial grade humidifier is ideal for most Canadian homes. It installs on either the warm or cold air plenum with a by-pass. Includes a built-in damper for summer/winter operation. High temperature material for a long service life.


09-12-2011

Thermo-Tech Mechanical - DELHI

The PVM and the PVH are constructed with integral motor-fan guard mounted on a rugged steel panel. The fans are constructed with integral motor-fan guard mounted on a rugged steel panel. HP the motors are single phase 115 Volts 60 Hertz open drip proof or totally enclosed. HP and larger are 208-230/460 Volt 60 Hertz open drip proof or totally enclosed. Motors are totally enclosed shaded pole, sleeve bearings.


09-12-2011

Thermo-Tech Mechanical - Carrier

Carrier?s Performance Series air conditioners are available with efficiency ratings starting at 13.0 SEER and 15.0 SEER Carrier was one of the first leading air conditioner manufactures to fully support this environmentally-sound mandate. The Carrier Canada Electronic Air Cleaners electronically remove airborne pollutants as small as 0.01 micron.


09-12-2011

Thermo-Tech Mechanical - RBI

Featuring full modulation with 3:1 turndowdn, the Futura III supplies the precise amount of heat necessary to maintain desired building temperature by matching heating demand without over-firing and wasted in energy. If you?re looking to maximize efficiency, reliability and flexibility in domestic hot water and hydronic heating applications, the Futura III is your heating solution.