Thermo-Tech Mechanical - DELHI

By: Thermo-Tech Mechanical Services  09-12-2011
Keywords: Motors, Fans, Blowers

Exhaust Fans

The fans are constructed with integral motor-fan guard mounted on a rugged steel panel. Propellers are constructed of aluminum. Motors are totally enclosed shaded pole, sleeve bearings.

All fans are available with variable speed controllers.

All models stocked except PVL 16.

PVM and PVH Exhaust Fans

The PVM and the PVH are constructed with integral motor-fan guard mounted on a rugged steel panel.

Propellers are constructed of aluminum. Motors are totally enclosed ball bearings.

PVI Industrial Exhaust Fans

Available Motors: Up to � HP the motors are single phase 115 Volts 60 Hertz open drip proof or totally enclosed.

Motors � HP and larger are 208-230/460 Volt 60 Hertz open drip proof or totally enclosed. All motors are 1750 RPM.

PACKAGED INDUSTRIAL FAN

The packaged industrial fans have been designed to meet ht requirements of all modern industrial sir moving and pneumatic conveying applications. The units are ruggedly constructed of heavy gauge all-welded steel.

FORWARD CURVE BELT DRIVE

Heavy gauge all-welded steel construction. The completely packaged units allow easy access to motor, drive and bearings for lubrication, belt adjustment and wiring.

DIRECT DRIVE BLOWERS

(FORWARD CURVE)

The Direct Drive Forward Curve Blower housings and bases are 16 gauge steel.

The wheels are steel with cast iron hubs.

The D5 thru D9 are available from stock with open drip proof, all angle, sleeve bearing, reliant mounted, split phase, 115 Volt, 60 Hertz, single phase motors.

PRESSURE BLOWERS

(Direct Drive)

The direct drive pressure blower has a 16 gauge housing and motor base. The wheel is die cast aluminum.

The PW 8 and 9 are available with the 115 Volt, 60 Hertz, open drip proof motors. The PW 11, 12 and 14 are available with 208-230/460 Volts, 60 Hertz, open drip proof or tally enclosed fan cooled motors.

NON-OVERLOADING BELT DRIVE BLOWERS

Features heavy gauge all-welded steel construction. The completely packaged units allow easy access to motor, drive and bearings for lubrication, belt adjustment and wiring.

Sizes 105 thru 245 have backwardly inclined wheels and sizes 270 thru 365 have airfoil wheels. Both are non-over-loading.


Keywords: Blowers, Fans, Motors

Contact Thermo-Tech Mechanical Services

Email - none provided

Print this page

Other products and services from Thermo-Tech Mechanical Services

09-12-2011

Thermo-Tech Mechanical - OsKar

The use of self supporting joints, flexible hoses and smooth bore tubing allow for easy placement of the arm?s hood near the source of the problem. Oskar self supporting fume arms provide the economical and effective methods for the capture of fumes. Chemical applications such as laboratories. Grinding dusts and most airborne dusts.


09-12-2011

Thermo-Tech Mechanical - GeneralAire

Thumb screws allow access to distribution through, drain pan and evaporator pad for easy cleaning and service. This rugged commercial grade humidifier is ideal for most Canadian homes. It installs on either the warm or cold air plenum with a by-pass. Includes a built-in damper for summer/winter operation. High temperature material for a long service life.


09-12-2011

Thermo-Tech Mechanical - SRP

A heavy duty industrial/commercial heater with the widest rate range and most efficient reflector in the industry. Seven year warranty on aluminized heat exchanger with post purge feature. Five year warranty on hot rolled heat exchanger. High efficiency residential heater in two rates. Rates 40,000 to 220,000 btu/h.


09-12-2011

Thermo-Tech Mechanical - Carrier

Carrier?s Performance Series air conditioners are available with efficiency ratings starting at 13.0 SEER and 15.0 SEER Carrier was one of the first leading air conditioner manufactures to fully support this environmentally-sound mandate. The Carrier Canada Electronic Air Cleaners electronically remove airborne pollutants as small as 0.01 micron.


09-12-2011

Thermo-Tech Mechanical - RBI

Featuring full modulation with 3:1 turndowdn, the Futura III supplies the precise amount of heat necessary to maintain desired building temperature by matching heating demand without over-firing and wasted in energy. If you?re looking to maximize efficiency, reliability and flexibility in domestic hot water and hydronic heating applications, the Futura III is your heating solution.