Wood is the primary component used in the construction of most houses and many commercial facilities. These structures, especially during the framing stage, are very susceptible to fire. Once the structure is completed, the wood dries out over time leaving a very volatile mass of fuel to burn. Whether the fire is started by human error, an electrical malfunction, lightning, chimney fire or other means of ignition, if the structure is not protected, it will burn. With the use of lightweight building materials and construction methods in use today, many of these homes and businesses are experiencing structural failure within minutes or a fire. This leads to the injury and death of both occupants and firefighters. No-Burn® Wood Gard is the answer!
No-Burn® Wood Gard is applied during the framing of the structure. After the structure is completed, No-Burn® Wood Gardprotects indefinitely. Whether an electrical short inside a wall starts, the structure sustains a lightning strike or a fire within the living space extends to the framing, No-Burn® Wood Gard is ready to protect the structure. As time passes and wood dries out, No-Burn remains intact ready to do