ETAP Real-Time | Power Simulation Software

By: Etap Canada  09-12-2011
Keywords: Engineering, energy management, Load Shedding

ETAP Real-Time is a suite of software tools that offers a fully integrated Enterprise Resource Planning (ERP) solution. Through 24/7 monitoring, simulation, and optimization of electrical systems that are in place, ETAP can improve system efficiency, reduce losses, and increase profits.

ETAP Real-Time benefits operations, engineering, financial, maintenance, and system planning. It provides an Intelligent Energy Management System for Operators, Managers, & Engineers.

Reduce Energy Usage provides ongoing savings for electricity costs.
Optimize System Operation enables significant savings via operation costs.
Improve Power System Reliability reduces outages & downtime.

Power Management System (PSMS)
Energy Management System (EMS)
Fast Load Shedding (ILS)
Substation Automation System (iSub)

Keywords: energy management, Engineering, Load Shedding

Contact Etap Canada


Print this page

Other products and services from Etap Canada


Motor Acceleration Analysis Software, Motor Starting Voltage Transient

The Motor Acceleration module provides engineers with a robust tool to evaluate the starting, stop, and restarting of motors and other loads. Motor starting analysis includes the ability to transition the entire power system from one loading state to another loading state. Load applications include synchronous and induction motors as well as Motor Operated Valves. Test fast bus transfer voltage impacts using load transitioning.


Transient Stability Analysis, Load Shedding Software

Engineers use Transient Stability to identify critical clearing time, to model motor dynamic acceleration, to develop load shedding schedules, to perform fast bus transfer calculation limits, for the start-up of generators under normal and emergency conditions, and for calculating various system dynamics.


Load Flow Analysis Software, Voltage Drop Calculator

Built-in functions such as the automatic device evaluation, alarms for critical and marginal limits, a powerful results report comparison analyzer, and intelligent, user-friendly graphics make it the most reliable load flow analysis software.


Arc Flash Analysis Software, CSA Z462

Occupational Health and Safety, Canadian Standards Association, National Fire Protection Association, and IEEE have been directly involved with industry to attempt to reduce the number of accidents related to Arc Flash and Shock Hazard. These calculations performed by electrical engineers provide both electrical and safety-oriented information necessary to minimum risk operation of electrical systems.


Protective Device Coordination & Sequence of Operation Software

A first of its kind, Sequence of Operation, enables users to visually identify which device operates in order, given the location of a fault anywhere in the system. ETAP STAR assists with identifying potential false trips, relay mis-operation (relay coordination), and mis-coordination. Provides a method to theoretically test all protective device settings and double-check coordination plans.


Short Circuit Analysis Software, Current Calculations

ETAP Short Circuit Analysis calculates comprehensive results regarding the full range of ANSI and IEC short circuit calculations required by engineers when designing, modifying and modernizing power systems. Device duty compares the fault current calculated from these networks for evaluation of protective equipment as well as other connected electrical equipment.