Manufacturing Control Valves and Associated Instrumentation Alberta, Canada - control series E

By: Cvs Controls  09-12-2011

CONTROL VALVES - Series E Globe Valves

Available sizes in the Series ED & ET Globe Valves: 1, 1½, 2, 2½, 3, 4, 6 and 8 inch

Available sizes in the Series EZ Globe Valve: 1, 1-1/2, and 2 inch

The CVS Series E is a single port globe-style body with composition or metal seats and a balanced “push-down-to-close” valve plug.

There are three styles of valves available:

  • Design “CVS ED” is intended for general control application over a wide variety of temperature and pressure drops.
  • Design “CVS ET” is intended for applications requiring low leakage rates with composition seating (TFE) for tight shutoff requirements or metal-to-metal seating for higher temperature capabilities. The valve plug has a two-piece upper seal.
  • Design "CVS EZ" valves are globe-style with integral end connections, post guiding, and quick-change trim. These valves are used in chemical or hydrocarbon processing applications or in applications that require control of non-lubricating, viscous, or other hard-to-handle fluids.

*Flow Characteristics are Equal percentage, quick opening,

The flow direction for standard cages ("CVS ED & CVS ET") is flow down, and the flow direction for the CVS EZ is up through the seat ring with the following flow characteristics available: linear, quick opening, and equal percent.

The end connections are ANSI Class 150, 300 and 600 Raised Face or Ring Type joint flanges as per ASME B16.34-1996.

Valve bodies are available in LCC, WCB and 316sst material.

CVS Controls manufactures Control Valves and associated instrumentation products to specification that facilitate the direct replacement with FISHER* process control equipment.

* FISHER is a registered trademark of Fisher Controls International Inc. Fisher Controls International Inc. is not affiliated with CVS Controls Ltd. in any manner. Fisher Controls International Inc. has not reviewed, sanctioned or endorsed any products manufactured, reconditioned, sold or marketed by CVS Controls Ltd.


Other products and services from Cvs Controls

09-12-2011

Manufacturing Control Valves and Associated Instrumentation Alberta, Canada - control series D

The CVS Series D and Series DA are single port, screwed-in, metal-seated globe style valve with unbalanced post-guided plug and push-down to close plug action used for high-pressure applications. CVS Controls manufactures Control Valves and associated instrumentation products to specification that facilitate the direct replacement with FISHER* process control equipment.


09-12-2011

Manufacturing Control Valves and Associated Instrumentation Alberta, Canada - control series EW

The flow direction for EWD and EWT is normally flow down, and the EWS is normally flow up with the following flow characteristics available: linear, quick opening, and equal percent. CVS Controls manufactures Control Valves and associated instrumentation products to specification that facilitate the direct replacement with FISHER* process control equipment.


09-12-2011

Manufacturing Control Valves and Associated Instrumentation Alberta, Canada - control series H

CVS Controls manufactures Control Valves and associated instrumentation products to specification that facilitate the direct replacement with FISHER* process control equipment. Design “H5T” is a single port, globe-style body with cage guiding, balanced valve plug and composition or metal seats. Design “H2D” is a single port globe-style body with cage guiding, balanced valve plug and metal seats.


09-12-2011

Manufacturing Control Valves and Associated Instrumentation Alberta, Canada - control series HPX

CVS Controls manufactures Control Valves and associated instrumentation products to specification that facilitate the direct replacement with FISHER* process control equipment. For standard cages, the flow direction is flow down with the following flow characteristics: equal percentage, modified equal percent, and linear.


09-12-2011

Manufacturing Control Valves and Associated Instrumentation Alberta, Canada - control series PQ

The CVS Series 128PQC Control Valve body assemblies are suitable for on-off dump valve service in oil and gas production applications, in either sweet or sour gas conditions. CVS Type 128PQC is a 1-inch Control Valve, standard configuration is with a solid pipe plug threaded into the bottom connection for straight-through flow. This is a single port valve with unbalanced stem-guided valve plug, and push- down-to-close valve plug action.


09-12-2011

Manufacturing Control Valves and Associated Instrumentation Alberta, Canada - control series V

CVS Controls manufactures Control Valves and associated instrumentation products to specification that facilitate the direct replacement with FISHER* process control equipment. Typical actuators used are the pneumatic spring and diaphragm rotary actuator and the pneumatic piston rotary actuator. The flow characteristic is modified equal percent, with normal flow into the convex side of the Ball.