GasFinder « Boreal Laser

By: Boreal Laser  09-12-2011
Keywords: Leak Detection, Gas Monitor, Perimeter Monitoring

GasFinder « Boreal Laser

GasFinder is a portable, battery-powered open path gas monitor providing one second response and broad dynamic range. Permanently calibrated, GasFinder is a small and light (less than 5kg) hand held solution. GasFinder response does not depend on path length, so a series of paths of different lengths (between 1m and 1000m) can be measured in quick succession. Ideal for short duration studies and troubleshooting, GasFinder is designed to include safety monitoring during process unit turnarounds and new construction and commissioning.

Perimeter and Area Monitoring - GasFinder can be permanently installed to monitor chemical and petroleum plants for both combustible and toxic gases. GasFinder can be used to replace arrays of point sensors for perimeter monitoring. A single light path will replace many point sensors. With GasFinder perimeter monitoring, all gas dispersed from a facility is detected and logged.

Emission Measurement – An estimate of the total fugitive emissions from a site can be determined using environmental data, EPA gas dispersion models, and GasFinder sensor data.

Portable Leak Detection – GasFinder can be used as a portable open path gas sensor to survey a large site relatively quickly. Areas of elevated gas concentration can be bracketed using shorter path lengths in order to locate leaking valves, flanges or fittings.

Keywords: Gas Monitor, Leak Detection, Perimeter Monitoring

Other products and services from Boreal Laser


Solutions « Boreal Laser

Simultaneous monitoring over multiple fixed sample paths either in-situ, extractive, or open path. Emissions from a natural gas pipeline through a large densely populated and congested area. Measurements of single gas species over pipeline or similar extremely long emission source. Measurements of single gas species through a fixed open air sample path. Measurements of multiple gas species in various locations.


GasFinderMC « Boreal Laser

Cross Duct Probe – With one second data rates, the cross duct probe is ideal for duct based process control or large diameter stack monitoring. Extractive Multipass Cell – The extractive multipass cell allows a gas sample to be removed from the process and analyzed offline. Open Path Remote Head – Suitable for ambient long path monitoring, roofline monitoring, and leak or emergency release monitoring.


Products « Boreal Laser

GasFinderFC is a fully portable fiber-coupled version of GasFinder perfect as a portable stack monitor, pipeline leak detector, vehicle emissions monitor or portable multi-function gas detector. GasFinder is a fully portable open path gas monitor designed for perimeter and area monitoring, emission measurement and portable leak detection.