OzoneLab™ Ozone Exposure Services

By: Ozone Services  09-12-2011


T he OzoneLab™ Team has offered Ozone Exposure Services since 1999. We can help clients in designing custom exposure test(s) and/or we can execute the tests specified by any of the most common ASTM standards dealing with material ozone exposure:
  • D 518 - Test Method for Rubber Deterioration — Surface Cracking
  • D 1149 - Test Method for Rubber Deterioration — Surface Ozone Cracking in a Chamber
  • D 1171 - Test Method for Rubber Deterioration — Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens)
  • D 3395 - Test Method for Rubber Deterioration — Dynamic Ozone Cracking in a Chamber
  • D 4575 - Standard Test Methods for Rubber Deterioration — Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers

We are able to provide the following types of Material Exposure services:

Upon the completion of the exposure testing, Ozone Services provides you with a report specifying the type of exposure conducted.



 
Maximum Sample sizes: up to 12x 12x 12"
Ozone Concentration/standard testing: up to 100mg/l (7% or 70,000ppm by weight O3/O2)
Ozone Concentration/special arrangements: up to 140mg/l (10% or 100,000ppm by weight O3/O2)
Regulation of temperature in range: 15-100°C / 60-212°F


Maximum Sample sizes: up to 12x 12x 12"
Ozone Concentration/standard testing: up to 800mV ORP
Ozone Concentration/special arrangements: up to 1200mV ORP
Regulation of temperature in range: 1-75°C / 32-167°F

Maximum Sample sizes: up to 12x 12x 12"
Ozone Concentration: depends on the chosen liquid saturation limitations
Regulation of temperature in range: 15-100°C / 60-212°F



Other products and services from Ozone Services

09-12-2011

OzoneLab™ OL80A Ozone Generator & Gas Analyzer

If you are looking for specifications about our ozone generators, we would like to encourage you to review our "Retired Designs" sections. After a year of providing select machines to our clients, we have sold the last of our available stock. We decided to stop producing ozone generators and started advising our clients of our intended action.


09-12-2011

OzoneLab™ UV Quartz Cuvette

High quality glass which, besides many other superior properties over standard laboratory glass, has also very low resistance to UV light. The OzoneLab™ team produces standard and custom cuvettes. Individually packaged in a 7"x12" sterilizable pouch. Includes the insert and locking rings. Will fit some units made in Germany. Is a regular stock item.


09-12-2011

OzoneLab™ Manufacturers of Ozone Generators, Ozone Analyzers and UV Instruments

The OzoneLab™ world we have created and are continuing to expand is full of ideas mixing physics and chemistry, buzzing & glowing instruments, shining beauty of scientific glassblowing, and a never ending drive for innovation - a world blending new technologies with proven know-how and old fashion craftsmanship.


09-12-2011

OzoneLab™ UV Irradiation Instrument 4-8-12W/12VDC

When the lid is closed, the pin located at the bottom side of the lid activates the built-in safety micro-switch, which turns “ON” pre-selected UV bulbs. The installation of the UV bulb is done by sliding the UV bulb pins into the UV bulb socket, and gently rotating the bulb 90°. The selection of the UV bulbs installed and their configuration must match the requirements of the application targeted.