OzoneLab™ OL80A Ozone Generator & Gas Analyzer

By: Ozone Services  09-12-2011
Keywords: Ozone Generators

In the summer of 2009, we decided to stop producing ozone generators and started advising our clients of our intended action. After a year of providing select machines to our clients, we have sold the last of our available stock. If you are looking for specifications about our ozone generators, we would like to encourage you to review our "Retired Designs" sections. You may find this portion of our website useful if you are considering purchasing used OzoneLab™ equipment or to compare to another manufacturer.


Retired OzoneLab™ Designs

Keywords: Ozone Generators

Other products and services from Ozone Services

09-12-2011

OzoneLab™ Ozone Exposure Services

D 1171 - Test Method for Rubber Deterioration — Surface Ozone Cracking Outdoors or Chamber. D 1149 - Test Method for Rubber Deterioration — Surface Ozone Cracking in a Chamber. T he OzoneLab™ Team has offered Ozone Exposure Services since 1999. Regulation of temperature in range.


09-12-2011

OzoneLab™ UV Quartz Cuvette

High quality glass which, besides many other superior properties over standard laboratory glass, has also very low resistance to UV light. The OzoneLab™ team produces standard and custom cuvettes. Individually packaged in a 7"x12" sterilizable pouch. Includes the insert and locking rings. Will fit some units made in Germany. Is a regular stock item.


09-12-2011

OzoneLab™ Manufacturers of Ozone Generators, Ozone Analyzers and UV Instruments

The OzoneLab™ world we have created and are continuing to expand is full of ideas mixing physics and chemistry, buzzing & glowing instruments, shining beauty of scientific glassblowing, and a never ending drive for innovation - a world blending new technologies with proven know-how and old fashion craftsmanship.


09-12-2011

OzoneLab™ UV Irradiation Instrument 4-8-12W/12VDC

When the lid is closed, the pin located at the bottom side of the lid activates the built-in safety micro-switch, which turns “ON” pre-selected UV bulbs. The installation of the UV bulb is done by sliding the UV bulb pins into the UV bulb socket, and gently rotating the bulb 90°. The selection of the UV bulbs installed and their configuration must match the requirements of the application targeted.