Kalpo design - oil & natural gas compressors technical consulting, drafting and designing services

By: Kalpo Design  09-12-2011
Keywords: Oil, Gas, Natural Gas

Kalpo design - oil & natural gas compressors technical consulting, drafting and designing services

Following services are offered:

  • Mesh or vane type scrubber sizing and design
  • Inlet filter separator & reverse flow coalescers
  • Pulsation bottles with or without choke tubes - optimization and recylindering
  • Dry gas filters and fuel gas filters
  • Lube oil separators vertical or horizontal
  • Blowcase systems c/w sizing & calculations
  • Slug catchers and three phase separators
  • Process and utility piping design per ASME B31.3
  • ASME calculations for pressure vessels and piping, sweet and sour service as per NACE
  • Sizing for full range of instrumentation and valves, PSV, Bypass, Blowdown, Suction control valves, Backpressure regulators, Dump systems and meter runs
  • Structure deflection design for skid and load design for the cranes
  • Full range of instrumentation for shutdown systems and set points
  • Oil system design for screw compressors, recip. compressors and engines
  • Fuel gas and start gas system for engines, cooling systems for engines and compressors
  • Building schedule, air ventilation and heater sizing
  • Building classification Fugitive Emission studies as per CEC Class I, Zone 2

Keywords: Compressors, Gas, Natural Gas, Oil