PAINT BOOTH

PAINT BOOTH from HVAC SYSTEMS LTD

By: HVAC SYSTEMS LTD  31-03-2014
Keywords: Paint Booths

One (1) Truck Spray Booth – Supply Only Dimensions: Overall outside Dimensions: 16’-0" Wide x 50’-0” Long x 16'-0” High. Construction: All panels are pre-punched every 6”, (bolted design) with 3/8” holes and are manufactured from 18 gauge galvanized G90 steel. Ventilation System: Two (2) 30” diameter Exhaust Fans with non-sparking aluminum blades are provided. Each fan is powered by a 575V / 3-PH hi-efficiency motor. Air velocity is designed to conform to OSHA, NFPA and EPA regulations. Lighting: Forty (40) 2’ x 4’hi-efficiency T-8 style fluorescent light fixtures and forty (40) 2’ x 4’ clear tempered glasses are provided. Each light fixture includes mounting brackets (tubes not included). Exhaust Chamber: One (1) Exhaust Chamber size 16’W x 12’H – accordion type. Stiffeners: One (1) set of Side Stiffeners and Roof Stiffeners. Man Doors: Two (2) Man Doors size 36”W x 84”H. Front Doors: One (1) set of Front Doors size 14’W x 14’H. Air Supply Filter Box: One (1) Air Supply Filter Box size 16’W x 3’H x 10’D. Air Supply Filters: Air Supply Filters will be supplied. Andreae Media Filters: Andreae Media Filters will be supplied. Gaskets: All Gaskets will be provided as necessary. Handles: All Handles will be provided as necessary. Magnets: All Magnets will be provided as necessary. Hardware: All Hardware will be provided as necessary. Floor Channels: One (1) set of Floor Channels. P a g e HVAC Systems Ltd. February 18, 2014 Interlock Kit One (1) Interlock Kit which includes a combination of the following: • One (1) Solenoid Valve • One (1) Air Flow Switch • One (1) Magnahelic Manometer One (1) Single Stage Air Make up Unit – 26,000 CFM Features Included: • This unit is “CSA Approved” • All Units are Pre-Piped and Pre-Wired • All Units are Factory Tested to Insure Trouble Free Start-Up and Operation • All Panels 18 Ga. Galvanized G90 Anti-Corrosion • Double Wall Insulated Panel to minimize heat loss and noise • 80° F Discharge Temperature • All Seams are filled with Sealant • Maxon burner with 2.6 MBTU/HR heat capacity • Power supply: 575 V / 3 PH / 60 Hz • Remote control panel with on/off switch, summer/winter selector switch, cycle selector switch and temperature control. • Required to Supply Replacement Air for the Paint Booth Exhaust Fan • Natural Gas Fired • Designed for Indoor/ Outdoor Installation with 0.75”s.p. • Delhi Blower with Forward Curved Blades and External Supported Flange Bearings • V-Bank Style with 2” Cleanable Air Intake Filters. Access Door Provided For Easy Maintenance and Servicing • Components for the Gas Train Build Up Using Maxitrol and Asco Products: - Main Gas Valve - Pressure Regulator - Solenoid - Water Regulator - High Pressure Gas Valve - Pilot Pressure Regulator - Pilot Gas Valve • Components for the Air Make-Up Unit constructed Using Maxon Products: - Burner - Flame Rod 4 | P a g e HVAC Systems Ltd. February 18, 2014 - Spark Plug • Overload Protection for Air Make-Up Unit - Motor fuse protection - Terminal Strips for Field Wiring - Lighting Contactor for Booth Lights • Test-port for measuring pressure drop across the burner that has adjustable profile. **Note: Installation and Electric Drawings will be supplied** | P a g e HVAC Systems Ltd. February 18, 2014 Customer Responsibilities: Delivery Crate Exhaust Ducting Air Supply Ducting Mechanical Installation Electrical Installation Sprinklers Gas Plumbing OTHER SIZES AVALABLE

Keywords: Paint Booths