Fittings - Swagelok
Brooks Valve & Fitting
Tubing, Vacuum Service, Tube Fittings
The live-loaded, two-ferrule tube fitting is easy to install, with no torque transmitted
to tubing during installation. The Swagelok gap inspection gauge ensures sufficient
pull-up upon initial installation.
Up to 11 000 psig / 760 bar
316 stainless steel, brass, carbon steelNPT, ISO/BSP, SAE/MS, AN, weld ends, port connectors, sanitary flanges, tube adapters
1/16 to 2 in.; 2 to 50 mm
Straights, elbows, tees, crosses, caps, plugs, nuts, ferrules
The Swagelok medium-pressure tube fittings offer a leak-tight gas seal and vibration resistance in applications up to 15 000 psig (1034 bar).
• Types• Sizes
Up to 15 000 psig (1034 bar)
Up to 1000°F (537°C)
316 stainless steelUnions, NPT, medium-pressure cone and thread adapters, male SAE/MS, reducers, port connectors, tube adapters, caps, plugs
1/4, 3/8, 1/2, 9/16, 3/4 in.; 6, 10, 12 mm
Straights, elbow, tees, cross
Other Medium-Pressure Products
Medium-pressure ball valves
High-pressure fittings are designed for pressures up to 60 000 psig (4134 bar), with both tube and pipe connections available.
Pressure Ratings• Sizes
• Back ferrule
• All other components
Up to 60 000 psig (4134 bar)S17400 stainless steel
316 stainless steelTube fittings, pipe threads, coned tube stub adapters, socket weld adapters
1/8 to 9/16 in.
Straights, elbows, tees
Swagelok® stainless steel, brass, carbon steel pipe fittings are available in 1/16
to 1 in.sizes for a variety of applications. Swagelok also offers gaugeable alloy 400/R-405 mechanically attached pipe fittings
that are ASTM F1387-qualified for shipboard use.
Swagelok offers weld fittings, in a
variety of materials, sizes, and shapes to suit any industrial or
specially cleaned, and industrial
- SAF 2507™ super duplex
- Vacuum service
- Stainless steel tubular fittings
Swagelok BPE series fittings are offered in up to 6 in. sizes in a
variety of configurations and can be ordered with inspection by an
independent, third-party service to verify compliance with ASME-BPE
requirements. Swagelok TS series biopharm fittings feature controlled
gasket compression to prevent gasket extrusion and fluid holdup.
Swagelok stainless steel sanitary fittings are available with 3-A–compliant, ISO 2852-compatible sanitary clamp connections, as well as a variety of specialty end connections in 1/2 to 12 in. sizes.
304 and 316L stainless steel
1/2 to 12 in.
32 µin. (0.81 µm), inside and outside; unpolished
• Sanitary Kwik-Clamp
• Sanitary and industrial tube butt weld
• Sanitary Acme threaded and
plain bevel seat
• PV threaded
• APV K-clamp
• John Perry
Ferrules, caps, elbows, tees, crosses, Ys, reducers, adapters, flanges
Swagelok offers a range of PFA fitting shapes and sizes, including
high-purity fine thread flare and tube fittings in straight, elbow, and tee configurations
for use with 1/8 to 1 in. tubing.
Other Plastic Products
PFA plug valves
PFA needle valves
UHP fluoropolymer diaphragm valves
UHP fluoropolymer check valves
Up to 275 psig (18.9 bar)
70 to 400°F (20 to 204°C)
Molded PFA/ASTM D3307 Type I
1/8 to 1/2 in.
Straights, elbows, tees;
ferrules, caps, plugs, nuts
- Visual indication of proper pull-up:
- no gap between body hex and hex nut
- hex flat alignment.
- Smooth, molded internal wetted surfaces reduce potential for system contamination.
- Grooved tubing allows for higher working pressure.
- Wrench make-up avoids the potentially unsafe practices of hand make-up and disassembly.
- Groove cutters groove PFA tubing for use with Swagelok PFA tube fittings.
- A tube cutter for plastic tubing up to 1 in. outside diameter is available.
Swagelok® VCO O-ring face seal fittings are designed for rapid assembly in pipe, tube, and welded systems. The “B” Type VCO fitting, for applications in biotechnology and pharmaceutics, uses an L-ring seal that eliminates concavity at the bore.
Specifications Pressure Ratings
• Bodies, glands, nuts
• ATW fittings
• Type • Size
Up to 15 400 psig (1061 bar)
Up to 400°F (204°C) 316 stainless steel
316L stainless steel
Fluorocarbon FKM Swagelok tube fitting, weld, NPT, male SAE/MS
1/8 to 1 in.
Glands, bodies, straights, elbows
VCR face seal fittings offer the high purity of a metal-to-metal seal, providing leak-tight service from vacuum to positive pressure. The seal on a VCR assembly is made when the gasket is compressed by two beads during the engagement of a male nut or body hex and a female nut.
• Glands, bodies, nuts
• Types• Sizes
Up to 11 200 psig (771 bar)
Up to 1000°F (537°C)316, 316L, 316L VAR stainless steels
316L stainless steel, nickel, copperWeld, NPT, male straight thread, Swagelok tube fitting
1/16 to 1 in.; 6 to 18 mm
Glands, bodies, welded assemblies, straights, elbows, tees, crosses, reducers, adapters
, Tube Fittings
, Vacuum Service