Now we have in stock Italian kitchens. Our stock kitchens have straight design and length from 3-3.75 m. Our kitchen designed as for slide in as for build in appliances
KRISTAL
PLAIN DOOR: - Wood agglomerate panel veneered with natural oak, dark oak or blond walnut. - MDF panel with matt or glass lacquer finish in the following colours: orange, white, dove grey, dark grey, beige, bright red, cocoa brown, black, amaranth, plum, st. steel, cyclamen, blue, emerald green, earth brown, iron grey, yellow, lavender and spring green.
SLIM
PLAIN DOOR: - MDF panel faced with a polymer sheet with matt finish, available in the following colours: light oak, dark oak, grey oak, natural walnut, cream, white, cognac oak and natural larch. - MDF wrapped with a sheet of gloss finish polymer, available in the following colours: off-white, white, red, cappuccino, amaranth, anthracite, aubergine, khaki, pearl and olive.
JOY
PLAIN DOOR: - 20 mm thick, class E1 wood agglomerate panel faced with sanded larch finish laminate, 4 sides have a 10/10 matching coloured edge. Colours: raw walnut, salt white, grey larch, coffee.
KARIZMA
PLAIN DOOR: - Chipboard panel faced with melamine paper and edged on 4 sides, available in the following colours: icy-white, opera oak, oklahoma oak, chanel oak or polar oak. - MDF panel, with gloss or matt lacquer in the following colours: orange, white, dove grey, dark grey, beige, bright red, cocoa brown, black, amaranth, plum, st.steel, cyclamen, blue, emerald green, earth brown, iron grey, yellow, lavender or spring green.
GLASS DOOR: - Steel finished aluminium frame. - Acid-etched or lacquered glass. - “Tree” glass in white, black or lacquer finish. Delivery time: 4 weeks.
TOP-HUNG DOOR: - Fitted with a gas piston opening system.
CARCASS: - Class E1, 18 mm thick, melamine-faced panel in a non-toxic material with a low formaldehyde content edged with 1mm thick ABS and faced with abrasion-resistant melamine resins. - Interior, exterior and edge surfaces available in the following finishes: white, turtle-dove grey and aluminium grey. - All side panels are supplied with
NON-THROUGH joining holes. - Fibreboard back panel faced with white, turtle-dove grey and aluminium grey paper: - 18 mm thick, class E1 melamine-faced interior shelves with push-fi t shelf supports for greater safety against accidental removal. - Wall unit carcasses are 35 cm deep and have been designed to have a greater storage capacity. - Melamine-faced 18 mm thick end panels are available in the following colours: natural oak, dark oak, kansas oak, raw walnut.
WORKTOPS: - In 40 mm thick, class E1, water-repellent chipboard, a non-toxic material with a low formaldehyde content covered with postformed laminate that guarantees excellent resistance to liquids, scratches, heat, stains and abrasion. - Marble or granite tops supplied with a stain-resistant treatment are also available.
CORNER BASE UNIT: - Available 65 cm deep for safe opening of dishwasher or drawers without bumping against the handles.
DISH-DRAINER UNIT: - Supplied with electrically welded wire racks in brushed stainless steel with an aluminium frame and a plastic drip-stopper that prevents the water from wetting the bottom edge of the side panels.
SERVICE GAP: - All base and tall units have a 40 mm receding back panel that creates a gap for pipes, cable runs etc.
LARDER BASKETS AND BOTTLE RACKS: - Made from electrically welded and chromed wire. FRIDGE TALL UNIT BOTTOM PANEL: - Impact-resistant and water-repellent ABS bottom panel for better airing and resistance in the event of water leakages from the fridge.
PLINTH: - melamine faced plastic material.
FEET: - In PVC, push-fi t, without interior holes on bottom panel of base units.
SINK UNIT BOTTOM PANEL: - Fitted with an aluminium protection that guards against water leakages, corrosion from detergents and trap condensation.
DRAWERS: - Standard supplied with metal sides and “AGANTIS SOFT-CLOSE” runners with a 16 mm thick grey, melamine-faced bottom panel. - On request with metal sides lacquered with metallic grey epoxy paints and a 16 mm thick grey melamine-faced bottom panel. - Available on request with solid wood sides varnished in wengè and tobacco colours with “softclosing” runners.
HINGES: - “SALICE SILENTIA” quick-attachment, soft-closing model adjustable in three directions with a straight base plate that allows better adjustment plus a click-on system. - 110° opening radius for base, wall and tall units; - 180° not soft-closing hinges for corner wall units.
SHELVES: - Melamine-faced, edged with 1 mm ABS edge, 30 mm thick.
FIXINGS: - Adjustable in height and depth.
UPSTANDS: - They are supplied in the same material as the worktop and are fitted with double rubber gaskets for a perfectly hermetic seal both against the top and against the wall. WALL PANELS BETWEEN WALL UNITS: - 6 mm thick laminate panel available in worktop finishes.